Dongguan Lanbo Electronics Technology Co., Ltd.

Custom Stamping Parts & Assembly For Card Dispenser

Custom Stamping Parts & Assembly For Card Dispenser
Part No :

Custom Stamping Parts & Assembly For Card Dispenser product parameters

We manufacture custom stamping parts. Production can be processed in strict accordance with customer-supplied drawings, or we can design drawings based on your requirements prior to production. The parameters of this product are shown in the table below.

name	Custom Stamping Parts & Assembly For Card Dispenser
Manufacturing process	Metal stamping services: blanking, bending, shearing, deep drawing, flaring, spinning, straightening
Materia	Stainless steel, aluminum, SGCC, SPCC, etc.
Surface treatment	Raw finish;anodizing;powder coating;zinc plating;brushing;blackening
Inspection	Chemical composition; mechanical properties; inspection of appearance, dimensions, shape and position tolerances; surface quality
Service	Non-standard customization; efficient delivery; after-sales service

Inquiry now

Detailed description

Custom Stamping Parts & Assembly For Card Dispenser

Introduction to Sheet Metal Stamping Technology

Sheet metal stamping is one of the most mature and efficient manufacturing methods for precision metal hardware applied in automated equipment. Using customized compound stamping dies, flat metal sheets are formed through punching, bending, blanking and notching under high pressure.
Compared with laser cutting and welding single-piece processing, precision stamping delivers consistent dimensional tolerance, smooth burr-free edges and stable repeatability during mass production. It is widely used to produce brackets, frames, housings and mounting components for automated machinery, traffic equipment, electronic devices and industrial control modules.
With flexible mold development capability, stamping technology supports customized component shapes, hole layouts and structural reinforcement, which perfectly meets the diversified demands of automated card dispensing equipment.

What Is A Card Dispenser for Highway Toll System

The automatic card dispenser is core intelligent equipment widely deployed at highway toll stations, parking access gates and traffic checkpoint systems. It automatically stores, separates and releases highway IC cards for passing vehicles.
Inside each card dispenser exists a complex mechanical structure: transmission gear sets, belt drive assemblies, card channel frames, sensor mounting brackets, outer protective housing and internal supporting frames. Continuous long-hour operation requires all metal parts to maintain stable vibration resistance, structural strength and dimensional accuracy.
Poor precision of internal metal accessories will easily lead to card jamming, transmission deviation and frequent equipment failure. Therefore, reliable customized stamping components become the key foundation for stable operation of card dispensers.

Custom Stamping Parts & Assembly For Card Dispenser

We provide one-stop Custom Stamping Parts & Assembly For Card Dispenser for traffic equipment manufacturers and intelligent toll system suppliers.
Our scope covers all sheet metal hardware required for automatic card dispensers: internal transmission mounting frames, gear support brackets, card passage structural frames, outer equipment housings, sensor fixing plates and reinforced connecting sheets.
All metal components are manufactured via precision sheet metal stamping. We complete punching, bending, tapping and surface treatment according to your CAD assembly drawings. Beyond single separate stamping parts, we also offer semi-finished pre-assembly service. We assemble gears, belts, circuit board mounting brackets and stamped frames into integrated subassemblies, directly ready for your final equipment assembly.

Key Advantages of Our Custom Stamping Parts & Assembly For Card Dispenser

High precision consistent stamping components

All parts are formed by dedicated stamping dies. Uniform dimensional tolerance ensures smooth matching of gear transmission and card channel structures, effectively reducing card jamming faults of the card dispenser.

Available semi-finished assembly service

Instead of only supplying loose individual metal parts, we support pre-assembly of stamped frames, support brackets and related accessories. It lowers your internal processing workload and shortens your equipment production cycle.

Adaptable to long-duration continuous operation

We select suitable raw materials including SPCC cold rolled steel, galvanized steel and stainless steel. Optional black powder coating, zinc electroplating delivers dust-proof, anti-rust and scratch-resistant performance to adapt to toll station working environments.

Fully customizable structural design

We adjust component size, hole position layout, bending angle and material thickness based on your card dispenser prototype. New mold development is available for new-generation card dispenser models.

Stable mass production capacity

From prototype sample trial to large-volume bulk orders, we maintain stable quality for stamping parts and subassembly delivery, supporting continuous equipment production for traffic equipment brands.

OEM Custom Service Scope

We offer full tailor-made service for Custom Stamping Parts & Assembly For Card Dispenser:
Material options: SPCC cold rolled steel, galvanized steel, 304 stainless steel, aluminum sheet in different thickness
Component customization: Card dispenser housing, internal support frame, gear mounting bracket, sensor fixing plate, transmission structural parts
Surface treatment: Black powder coating, blue zinc electroplating, color zinc plating, passivation anti-rust treatment
Service mode: Supply single stamping parts or finished pre-assembled subassemblies
Mold development: Develop exclusive stamping molds according to your drawings or physical samples, support small batch prototype testing.

Typical Application Scenarios

Our Custom Stamping Parts & Assembly For Card Dispenser are mainly used for highway toll station automatic card sending machinery.

Frequently Asked Questions

FAQ 1

Q: Can you produce custom metal stamping parts according to my drawings or samples?

A: Yes, we mainly focus on OEM & ODM customized stamping services. We accept 2D files like PDF/DWG and 3D files such as STEP, IGES. You can also send physical samples for us to copy and optimize the structure. Our engineering team will review your design and offer professional suggestions on cost saving and manufacturability for free.

FAQ 2

Q: What kinds of metal materials can you use for stamping processing?

A: We support a full range of common stamping metals, including SPCC cold rolled steel, SECC galvanized steel, SS304/SS316 stainless steel, 5052/6061 aluminum alloy, H62 brass and copper. We can select suitable raw materials based on your product usage, working environment and budget requirements.

FAQ 3

Q: Can I get trial samples before mass production? How long is the sample lead time?

A: Trial samples are available for all customized orders. The sample production cycle is 7–12 working days after drawing confirmation and mold opening. After you test and confirm the sample quality and dimension, we will arrange mass production. Small batch trial orders are also acceptable if you do not need large volume at first.

FAQ 4

Q: What surface finishing options do you provide for stamped metal parts?

A: We offer multiple surface treatments to meet anti-rust, anti-corrosion and appearance demands: zinc plating, nickel plating, powder coating, black oxide, passivation, polishing and anodizing for aluminum. If your products are exported to Europe, we can do surface treatment that complies with RoHS and REACH standards.

FAQ 5

Q: How do you control the dimensional tolerance of precision stamping parts?

A: Our tolerance for large stamped parts can reach ±0.1mm, while precision small parts can achieve ±0.01mm. We carry out strict three-step quality inspection: IQC for raw material incoming check, IPQC for on-line production inspection, and FQC full dimension testing before shipment. We can provide inspection reports and accept third-party quality inspection as requested.

About our company

Dongguan Lanbo Electronic Technology Co., Ltd. (Brand: LAMBOOR) was established in 2010 with 15 years of experience in precision hardware manufacturing. We own a 3,000 sq.m standardized factory and employ over 100 professional technicians, acting as an integrated one-stop manufacturer specializing in custom precision hardware structural components, covering mold development, stamping, sheet metal, CNC turning, welding and dust-free assembly.

We are fully equipped with Jinfeng/Aomate stamping machines, laser cutting machines, CNC bending machines, together with complete QC testing equipment including 2D projectors, salt spray testers and tensile testers. Certified to ISO9001:2015, we hold multiple utility model patents for hardware molds.

Our products are widely applied in consumer electronics, optical communication, medical devices, automotive and new energy electrical industries, with more than 400 customized projects completed. We maintain long-term partnerships with renowned enterprises including KYOCERA, Foxconn and RICOH.

63% of our annual RMB 30 million revenue comes from overseas exports. Our self-developed progressive mold technology cuts processing costs by 80%. We support rapid prototyping and mass production, delivering stable, cost-effective customized hardware solutions for global clients.