SPCC/SGCC Custom Sheet Metal Stamping Parts

SPCC/SGCC Custom Sheet Metal Stamping Parts can be produced strictly according to your technical drawings. If you do not have finished drawings, our engineering team can also design exclusive drawings and complete mass production of SPCC/SGCC Custom Sheet Metal Stamping Parts based on your functional and application requirements.

For raw material selection of SPCC/SGCC Custom Sheet Metal Stamping Parts, we adopt mainstream standard tandard qualified SPCC/SGCC as the default option to match your unique product demands for SPCC/SGCC Custom Sheet Metal Stamping Parts.

When it comes to surface finishing solutions for SPCC/SGCC Custom Sheet Metal Stamping Parts, we provide a full range of mature surface treatment processes including but not limited to Raw SPCC finish,powder coating,zinc plating,galvanization,blackening,painting and passivation needs of your SPCC/SGCC Custom Sheet Metal Stamping Parts.

Prepare a Component-Specific Stamping Enquiry

Identify the exact component you want quoted rather than referring only to the SPCC/SGCC page title. For a set or assembly, list each component separately so material, finishing and inspection requirements stay attached to the correct part.

• Part scope and revision: Send the current drawing and model or sample reference, with the part number, revision and units. Identify which components are included in the quotation.
• Material requirement: State the specified grade, sheet thickness, condition and applicable material standard for each component. If selection is open, describe the application and request a review rather than treating SPCC and SGCC as interchangeable.
• Finished-part requirements: Mark the mating holes, bends and other functional interfaces, any appearance or edge requirements, and whether critical dimensions apply before or after finishing. Attach the required finish specification to each component.
• Order and acceptance scope: Separate sample and production quantities. State any required inspection records, sample-approval steps, packaging and requested delivery date for review.

Use the custom stamping and sheet metal RFQ checklist to organise the enquiry and identify any requirements that still need discussion.

Frequently Asked Questions

FAQ 1

Q: Can you produce custom metal stamping parts according to my drawings or samples?

A: Yes, we mainly focus on OEM & ODM customized stamping services. We accept 2D files like PDF/DWG and 3D files such as STEP, IGES. You can also send physical samples for us to copy and optimize the structure. Our engineering team will review your design and offer professional suggestions on cost saving and manufacturability for free.

FAQ 2

Q: What kinds of metal materials can you use for stamping processing?

A: We support a full range of common stamping metals, including SPCC cold rolled steel, SECC galvanized steel, SS304/SS316 stainless steel, 5052/6061 aluminum alloy, H62 brass and copper. We can select suitable raw materials based on your product usage, working environment and budget requirements.

FAQ 3

Q: Can I get trial samples before mass production? How long is the sample lead time?

A: Trial samples are available for all customized orders. Confirm sample availability and lead time after the drawing and tooling requirements have been reviewed. After you test and confirm the sample quality and dimension, we will arrange mass production. Small batch trial orders are also acceptable if you do not need large volume at first.

FAQ 4

Q: What surface finishing options do you provide for stamped metal parts?

A: We offer multiple surface treatments to meet anti-rust, anti-corrosion and appearance demands: zinc plating, nickel plating, powder coating, black oxide, passivation, polishing and anodizing for aluminum. If RoHS or REACH requirements apply to the order, specify the applicable material and finish requirements and request the relevant declarations or test documents for review before production.

FAQ 5

Q: How do you control the dimensional tolerance of precision stamping parts?

A: Agree the dimensional tolerances and inspection requirements in the approved drawing before production. We carry out strict three-step quality inspection: IQC for raw material incoming check, IPQC for on-line production inspection, and FQC full dimension testing before shipment. We can provide inspection reports and accept third-party quality inspection as requested.

FAQ 6: Can SPCC and SGCC be substituted on the same drawing?

Do not assume a substitution is acceptable because both names appear in this page title. Use the grade, thickness, material condition and finish specified for the individual component. If an alternative is proposed, ask the responsible designer to review the assembly and finish requirements and approve the change in the drawing or order specification before production. A gallery photograph is not a material certificate.

About our company

Dongguan Lanbo Electronic Technology Co., Ltd. (Brand: LAMBOOR) was established in 2010 with 15 years of experience in precision hardware manufacturing. We own a 3,000 sq.m standardized factory and employ over 100 professional technicians, acting as an integrated one-stop manufacturer specializing in custom precision hardware structural components, covering mold development, stamping, sheet metal, CNC turning, welding and dust-free assembly.

We are fully equipped with Jinfeng/Aomate stamping machines, laser cutting machines, CNC bending machines, together with complete QC testing equipment including 2D projectors, salt spray testers and tensile testers.

Our products are widely applied in consumer electronics, optical communication, medical devices, automotive and new energy electrical industries, with more than 400 customized projects completed. We maintain long-term partnerships with renowned enterprises including KYOCERA, Foxconn and RICOH.

63% of our annual RMB 30 million revenue comes from overseas exports. Tooling and process options are reviewed for the specified component and order quantity; any cost comparison should state the agreed process scope and quotation basis. We support rapid prototyping and mass production, delivering stable, cost-effective customized hardware solutions for global clients.

contact us

Dongguan Lanbo Electronics Technology Co., Ltd.

• Site: http://www.lamboor.com
• Add: 2nd Floor, No.6 Gaoke Industry 5th Road, 4th Village,Tangxia Town, Dongguan, Guangdong, China (Mainland)
• Tel: 86-0769-88004528
• Phone: 86-13559772755

•  Lily lily@lamboor.com +86-13559772755
•  Catherine sales@lamboor.com +86-18928215298
•  Wisdom sales01@lamboor.com +86-18929157606